CLEVELAND MODEL HELICOPTER CLUB - Affiliated to the BMFA, Club Number 0415

Directions & Contacts email: mail AT clevelandheli DOT co DOT uk

 

Classified Ads


The following items are for sale by club members:
If you are currently a club member and wish to advertise here please e-mail the details and a picture to mail AT clevelandheli DOT co DOT uk


Minicopter Acrobat

Immaculate condition. All carbon/alloy construction comes standard with full metal head / tail, carbon frames, boom supports and fin set. Top of the range Heli from Acrobat. Suitable for the novice to the extreme 3D flyer. Please note canopy requires some attention. Can send detailed pictures on request of heli canopy. Ready to fly, just add your own TX.

JR high spec digital DS 8301 servos x 4 off
JR high spec 8700g servo x 1 (tail high speed 0.09 sec)
JR 900S high spec RX
RX battery 2000mah Sanyo cells
C.S.M SL 560 gyro (mini version)
Throttle Jockey Pro engine governor
Ripmax battery monitor
700mm carbon main blades

Engine / Muffler:
OS 91 SX-H PS fitted with new piston, piston ring, liner, front and rear bearings. (only had 2 gallon but had problems with previous bearing)

£800 or will swap / px for Wren turbine full auto start.

Click on the pictures above to enlarge. Contact Lee through mail AT clevelandheli DOT co DOT uk

!! NEW !! Added October 2009.


Tony Hallas has a couple of helicopters for sale.

Firstly a Raptor 60 with brand new servos, Futaba 401 gyro, 60 engine. Has been set up and only hovered twice. It is as new and in mint condition without a scratch on it and has just been sat gathering dust. £500 + postage.

Secondly a T-Rex 600 Electric version. It is brand new and has never been flown. Comes with a Futaba 401 gyro and three servos, carbon main blades, original box and instructions. This is in mint condition. £400 + postage.

Contact Tony through mail AT clevelandheli DOT co DOT uk.

!! NEW !! Added March 2008.


Sideframe Stiffeners for Thunder Tiger Raptor 60 and 90 size helicopters. CNC machined from aluminium with a sand blasted and hard anodised finish. Available in Anodised Black or Polished Silver. £29 + postage. Contact Tim Clark through mail AT clevelandheli DOT co DOT uk for details. Click on picture to enlarge.

Updated 21st February 2006.

Anodised Black Sideframe Stiffeners  Polished Aluminium Sideframe Stiffeners  Sideframe stiffeners fitted to Raptor 90

Exhaust Plugs Made in various sizes and with or without o-ring as required. £3.50 each + postage. Can be supplied with "Remove Before Flight" tag at £10 each + postage. Contact Darren Clark through mail AT clevelandheli DOT co DOT uk.

Added 11th January 2005.

Exhaust Plugs

HOME  > >  |  LEARNING TO FLY  > >  |  GETTING STARTED  > >  BATTERIES  > > DURALITES  > > FUEL  > >  |  MAINTENANCE  > >  RESOURCES  > >  |  3D PAGE  > >  |  GALLERY  > > 
|  RI:SE TV  > >  |  PERRY PUMPS  > >  |  CHINOOK  > >  |  AUTOS  > >  |  DIRECTIONS  > >  |  EVENTS  > >  CERTIFICATES  > >  |  FREQUENCIES  > >  |  GLOSSARY  > > SAFETY  > >  |
|  SIMULATORS  > >  |  NIGHT FLYING  > >  TURBINES  > >  PHOENIX-25  > >  |  PADDLE REVIEW  > >  |  SYNERGY  > > AUTOGYRO  > > SCALE  > >  |  WANTED  > >  |  CLASSIFIEDS  > >  |

BACK TO TOP  ^ ^

Last Modified: 26 October, 2009
Author: Darren Clark